ON PAPER, FIRST SHOT
True-to-bore alignment puts your point of aim where the barrel actually points. Your first round is on paper, not in the berm.
No gimmicks. Spend less time sighting in and more time shooting.
If you can load a magazine, you can use the X03.
Bargain-bin boresighters are why people think boresighting doesn't work.
| Feature | Aeroshot X03 | Generic boresighter |
|---|---|---|
| Beam | Daylight-visible green | Dim red, indoor-only |
| Bore fit | Machined snug, dot doesn't wander | Rattles in the bore |
| Caliber coverage | .22–.50 plus 12GA/20GA included | One caliber, adapters extra |
| Warranty | Limited lifetime | 30 days, if any |
| Support | USA support, real humans | Marketplace seller |
Try the X03 for 30 days. If it doesn't get you zeroed faster than anything you've used, return it for a full refund. No restocking fee, no interrogation. And the laser itself is covered for life under our limited lifetime warranty.
Yes, easily. The X03 does its job. The X03 seats snug in your bore, so the dot shows exactly where the barrel points. That puts your first round on paper at 25 yards, and most shooters confirm zero within 2–4 rounds.
Choose Green (X03) if:
✓ You zero outdoors or in bright daylight
✓ You shoot at 50+ yards
✓ Visibility is critical (e.g., aging eyes, bright sun)
Choose Red if:
✓ You mainly zero indoors or low-light
✓ You want longer battery life
Pro tip: 80% of our customers choose Green for the daylight visibility advantage. The pulsing beam also helps distinguish it from your reticle.
Yes, as long as the barrel is at least 2.25 inches long, excluding the chamber.
Magnetic bore sights mount on the muzzle externally, they're quick but less accurate due to slight tilt variations.
The X03 inserts directly into the bore, providing more precise alignment along the actual barrel axis. This is the same principle
used by professional gunsmiths.
Trade-off: Slightly slower setup (10 seconds vs 5), but significantly more accurate.
It works with most common and popular calibers from.22 to.50.
It is not recommended for subcompact or short-barrel handguns, or rifles with long muzzle devices.
No. The adapters are made of precision-machined brass and aluminum (softer than steel barrels) — they cannot scratch or damage rifling.
The fit is snug but designed for easy insertion and removal without force. Always ensure the barrel is clean before insertion.
Concerned about expensive firearms? We've tested with Cerakote, chrome-lined, and polygonal rifling — no issues reported.
The flashing beam is intentional and serves three purposes:
1. Easier identification: Distinguishes the laser dot from your reticle, other lights, or reflections
2. Daylight visibility: The intermittent flash is easier to spot against bright backgrounds than a steady beam
3. Battery efficiency: Extends battery life by ~40%
This does not affect zeroing accuracy — the pulse is fast enough that the dot appears continuous to the human eye.
The X03 uses a Class 3R laser (5mW±0.2mW) — the same classification as most consumer laser pointers.
Safety guidelines:
⚠️ Always treat firearms as loaded — verify chamber is empty before installing the bore sight
⚠️ Never look directly into the laser beam
⚠️ Don't point at people, animals, or aircraft
⚠️ Class 3R is safe for momentary exposure but can cause eye damage with prolonged direct viewing
Download the complete user manual for setup, adapter installation, and bore sighting instructions.
Aerolastec service and support store.